Skip to content

UL/cUL/CSA/ETL Labels

MR Label has been a UL Authorized Label Supplier since 1986 and is uniquely positioned to meet the needs of clients with UL label requirements. Our in-house UL label specialists have a thorough knowledge of UL label standards, approval processes, and documentation requirements. We partner with our clients to help them better understand the complex UL requirements and make the best possible selections for their products. Our products are recognized under the Standard for Marking and Labeling Systems, UL 969. We also offer a variety of substrates approved by the Canadian Standards Association (CSA). The ETL/Intertek label is also proof of product compliance. We use our approved UL/CSA materials and ink systems for all ETL labeling.

Request A Quote

Mr. Label VL- CSA - ETL
Mr. Label VL- CSA - ETL

PGDQ2 (USA) & PGDQ8 (Canada) (Component-Marking and Labeling System)

– Information on these labels are typically static (no sequential number or barcode)
– Submersible and weather label characteristics available
– Aggressive adhesives and protective overlaminates available
– Withstand abrasions and some chemicals, oils, and cleaning products
– Caution and warning labels
– Industrial equipment and machine labels (air compressors, valves & fittings)
– Appliances, light fixtures and control panel labels

MARKINGS (click to view approved substrates and temperature ranges):
MIRMYR, MIRMYR-D, MIRMYR-2D, MIRMYR V, MIRVY IV, MIRMYR VI, MIRMYR VII

Base Materials Available: We offer UL Polyester and UL vinyl. Most UL listings above are approved for white base stock. Some listings are approved for clear, bright silver, or matte silver base stocks.

Overlaminate: We offer UL polyester clear gloss or matte; textured lexan. Some listings are approved with a thermal transfer (TT) or dot matrix printable over-laminate.

mr-label-co-pgdq2-and-pgdq8

PGJI2 (USA) & PGJI8 (Canada) (Component-Printing Material)

– Labels typically contain variable data (I.e.: sequential numbers, barcodes)
– Variable data covered with overlaminate will protect from abrasion & weather
– Product specification labels, manufacture dates, ratings, etc…
– Industrial equipment and machine labels
– Appliance and control panel labels

MARKINGS (click to view approved substrates and temperature ranges):
Therman-V, Therman X
Base Materials Available:
We offer UL thermal transfer (TT) Polyester and UL vinyl. These listings are approved for white base stock.
Overlaminate: We offer UL polyester

Mr. Label VL- CSA - ETL

PGIS2 (Component-Marking and Labeling Systems Limited Use)

– Electrical cord and wire wrap labels
– Caution and warning information

MARKINGS (click to view approved substrates and temperature ranges):
MR-Cord

Base Materials Available: We offer UL polyethylene. This listing is approved for its white base stock.
Overlaminate: We offer UL polyester clear gloss overlaminate.

Mr.-Label-Thermal-Transfer-Blank-Direct-Transfer-10

TEOU2/TEOU8 (Component – Repackaged Recognized Components)

– This UL file allows us to offer many UL and cUL materials as blank labels only.
– The blank labels are imprinted on by the end user and become a component of a bigger system or product.

If you have any questions regarding UL/cUL/CSA/ETL labels, please contact Brigid: brigid@MRLabelCo.com.

ADDITIONAL INFO:

MRLabel@MRLabelCo.com | artdept@MRLabelCo.com
Toll Free: 1-888-LABELCO  Phone: 513-681-2088
Fax: 513-681-1249

ul2
csa
ru
ul-listed
classified-ul
credit-cards

All Content Copyright © 2023 MR Label CO. | All Rights Reserved.